2024 Launch X431 Pro3S+ DBScar VII with Smartlink 2.0 HD Module for Car and Truck Supports CAN FD DoIP ECU Coding Topology Map

Launch X431 Pro3S+ DBScar VII with Smartlink 2.0 HD Module for Car and Truck


Launch X431 Pro3s+ Feature:

• The tablet has a higher version system, larger storage, and longer battery life, making diagnosis faster, more stable, and more durable.
• Upgraded to DBSCAR VII diagnostic connector, supports CANFD and DoIP
• Supports Topology Mapping diagnosis
• Supports EV diagnostic kit (NEW)
• With 8-core qualcomm-snapdragon processor
• ALL-System ALL-Function Diagnostics + Full Bi-directional Control ((Active Test))
• Supports ECU Coding & Online Coding & Key Programming
• Wide car model coverage, strong diagnostic function, supports full system diagnosis of all supported car models
• Support VIN code automatic identification function to quickly enter diagnosis
• Supports reading version information, code reading, code clearing, reading data stream, action testing, coding, matching, etc.
• Supports VAG Guided Function for compatible with VW, AUDI, SKODA, SEAT (Step-by-Step Guide)
• Supports Auto auth for FCA/SGW
• Supports tire pressure activation, programming, learning and detection functions with X-431 TSGUN
• Supports anti-theft programming with X-PROG 3
• Multiple expansion modules support: endoscope, BST-360, oscilloscope, sensor, wifi printer
• Supports 37 special functions such as maintenance light reset, throttle matching, steering angle reset, brake pad reset, tire pressure reset, etc.
•  Work with HDIII Heavy Duty to Test 24V Truck.(need extra truck module). It not only supports passenger car diagnosis but also supports commercial vehicle expansion.
• 2 Years Free Software Subscription. later 1 year subscription is $899 (for both car and trucks)
• New app supports EV diagnostic kit
• Multi-language Supported (24): English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Simplified Chinese, Traditional Chinese.

Launch X431 Pro3S+ Add-on Modules

1. X431 VSP-600 Videoscope (For inspection of hidden and narrow parts of the engine, fuel tank, brake system, etc.)

2. X431 TSGUN (You can use it not only to activate the sensor ID, tire pressure, sensor frequency, tire temperature and battery status; you can also program sensor data to a blank LAUNCH branded sensor in three ways: automatically, manually and by activating a copy; at the same time, you can write the newly programmed sensor ID to the vehicle ECU.)

3. X431  X-PROG 3 (IMMO For V.A.G Group Above 3.5,advanced immobilizer and key programmer) Vehicles that require a clone key are not compatible with this accessory.

4. X431 Heavy Duty Module -LAUNCH HDIII or SmartLink HD 2.0 add-on module is an essential truck module which can turn your X431 scan tools into full function heavy duty truck diagnostic tools,working on both heavy-duty(Class 4 through 8) and medium-duty trucks(Such as heavy trucks, city buses, bulldozers, excavators, etc.)

5. X431 ADAS Mobile/ADAS PRO -Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.

6. X431 Printer (Print out diagnostic data/ reports.)

7.X431 BST360 battery test.(For Battery Cranking system Test, Battery Charging system Test, Battery Health Test)

8. EV diagnostic kit: perform battery pack analysis

9. IMMO Software Package: advanced immo key programming with x-prog3

10.  S2-2 Multimeter

11. S2-2 Sensorbox

Introduction of Job Menu

Automatic (Intelligent ) Diagnosis: Automatically decode the vehicle VIN and quickly access to the vehicle system.

Local Diagnose: Diagnose a vehicle manually.

Remote Diagnose: It helps repair shops or mechanics to diagnose a remote vehicle, and launch instant messages, allowing for improved efficiency and faster repairs.

Special (Services) Functions: It offers coding, reset, relearn and more service functions, to help vehicles get back to functional status after repair or replacement.

ADAS: This function enables users to perform ADAS (Advanced Driver Assistance System) calibration operations. The ADAS calibration software is disabled by default. Before using this function, users must activate the ADAS function using the ADAS Activation Card.

Mall: An online diagnostic software store. This module enables you to subscribe some extra software or service functions that are not integrated in the tool online.

60+ Kinds of Maintenance Functions (Vary By Car Model ,Year)

1.Oil Lamp Reset Service:perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB Reset:Help replace and reset the brake pad.
3.BAT battery service(BMS):Clear the fault information of low battery and make it match again
4.D.P.F service
5. SAS Steering Angel Sensor Reset:Reset the steering angle to zero to keep the car running straight.
6. ABS Bleeding: Help exhaust the air.
7. Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.
8. TPMS service: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
9. Throttle Adaptation: Initialize the throttle actuators to the default state.
10. AFS Headlamp Reset: Initialize the adaptive headlamp system.
11. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
12. Suspension Reset:Adjust the vehicle body height sensor for level calibration.
13. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.
14. Gear Learning: Monitors certain camshaft position sensors signals.
15.Tire Reset:Set the size parameters of the modified or replaced tire.
16.A/F Reset:Set or learn Air/Fuel ratio parameters.
17.Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
18.Coolant Bleeding:Activate the electronic water pump.
19.Language Change:Change vehicle system language.
20.Nox Sensor Reset:Reset catalytic converter learned value stored in ECU.
21.Stop/Start Reset:Set up the automatic start-stop function in ECU
22.Seat Calibration:Calibrate the memory in replaced or repaired seats.
23.Transport Mode:Deactivate the transport mode.
24.Windows Calibration:Perform door window matching to recover ECU initial memory.
25.AC System Relearn/Initialization.
26.E.GR Reset.
27.Reset Fuel Trim .
28.Reset Fuel Alcohol Level.
29.High Voltage Battery Diagnostics.
30.GPF Regeneration.
31.Camshaft/Crankshaft Sensor Relearn
32. Interactive Vehicle Dynamics (IVD) Initialization Sequence.
33.Fuel Economy Test
34.Halt/Resume Transmission Adaptive Learning.
35.Passive Anti Theft System(PATS)Functions.
36.Relearn Vehicle Data.38.Initialisation Of Automatic Tailgate .
37. Initialise Power Window Regulators;
38. Seat Standardisation
39.Normalise Slide/ Tilt Sunroof;
40.Activate Contactless Vehicle Access
41.Power-Down Command
42.Autoaddressing Ambient Light BDC.
43.Unlocking Auxiliary Heater
44.Drain/ Fill The Refrigerant Circuit
45.Installation Position Of Flap Motors ;
46.ETS Test Of Lithium lon Battery;
47.Register Battery Exchange
48.Reset Adaptation Values
49.Adjusting The Electromotive Throttle Controller;
50.Injection Quantity Compensation;
51.Open And Close Radiator Blind;
52.Activate/Deactivate Workshop Mode ;
53.Start-Up For Brake Pedal Travel Sensor .etc.
....

Launch X431 Pro3 S+ V5.0 Specifications:

Display Tablet
 
Operating system: Android 10.0
Memory: 4GB
Storage: 64GB
Screen: 10.1 inch capacitive touch screen with a resolution of 1280 x 800 pixels
Camera: Rear-facing 8.0MP camera
Communication: Bluetooth/USB
Working temperature: 0℃ ~ 50℃
Storage temperature -20℃ ~ 70℃
 

Launch X431 SmartLink C V2. Bullet Points:

1. Update Version of Launch X431 HD III: The transmission speed is faster and more stable, and the visual operation interface makes it more convenient.
2. Support Bluetooth, Wi-Fi, USB and other communication methods.
3. Can be used with Launch X431 V+, X-431 PRO3S and X431 PRO5 series.
4. Support full system fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action test.
5. Support commercial vehicles, passenger vehicles, new energy and other models: Covering Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai and other engine diagnostic software, it supports trucks, buses, construction machinery, agricultural machinery, trailers, ships and other types of vehicle software.
6. Support super remote diagnosis. 
7. 2 years free update, the Annual Subscription cost is 549USD/year after free update service.

NOTE: The SmartLink C HD does not work with Pro5/PAD V/PAD VII (they work with extra HD kit)

Compared with X-431 HDIII, the SmartLink C 2.0 is more powerful in function.

The transmission speed is faster and more stable.

The visual operation interface makes it more convenient.

It supports commercial vehicles, passenger vehicles, new energy and other models.

It supports super remote diagnosis.

Launch SmartLink HD 2.0 User Manual

Launch SmartLink C 2.0 Vehicle List
88 supported software list:

X431, JCB X431, Renault Heavy Vehicle X431, IRIZAR Heavy Vehicle X431, Zhongtong Bus (ZHONGTONG BUS) X431, USAFORD Diesel Version X431, AISIN Heavy Vehicle
X431, Yutong Bus X431, Foton Auman X431, IRISBUS Heavy Duty Truck X431, Kenworth Heavy Duty Truck X431, HD_TATA X431, VOITH Heavy Duty Truck
X431, Benz heavy truck X431, JAC heavy truck X431, CREDO heavy truck X431, Stirling heavy truck X431, Doosan engine X431 Perkins
X431, VOLVO Heavy Duty Truck X431, Freightliner Heavy Duty Truck X431, Dongfeng Commercial Vehicle X431, IWC Heavy Duty Truck X431, Peterbilt Heavy Duty Truck X431, DEUTZ
X431, Cummins engine X431, SCANIA X431, Chaochai X431, Xixing heavy-duty vehicle X431, WABCO ABS X431, ZF
X431, ISUZU Heavy Duty Vehicle X431, FUSO X431, Xichai X431, AutoSearch X431, Case X431, KNORR ABS
X431, IVECO Heavy Duty Vehicle X431, ASTRA X431, Quanchai X431, Dachai Heavy Duty Vehicle X431, Steyr X431, Miller
X431, special for Yuchai X431, BREMACH X-431, Dongfeng Yufeng X431, Golden Passenger Car X431, heavy-duty natural gas X431, HD_FLEXICOIL
X431, BOSCH X431, Hino X431, BONLUCK Bus X431, Higer Bus X431, DENSO_Diesel/Diesel Engine X431, Volvo Construction Machinery
X431, Shangchai X431, ERF X431, ALLISON gearbox X431, Ashok Leyland X431, DELPHI X431, MWM heavy duty vehicles
X431,DAF X431,UD Truck/Nissan Diesel X431,DETROIT Engine X431,Yang Diesel Engine X431,King Long Bus X431,Heavy Truck Demonstration Software
X431, FAW Jiefang X431, construction machinery X431, MACK heavy-duty vehicle X431, HD_ABS system X431, diesel version Mitsubishi X431, heavy-duty vehicle standard
X431, Hyundai Heavy Vehicle X431, SETRA Heavy Vehicle X431, WP Diesel Engine X431, Heavy Truck Aftertreatment System X431, Diesel Nissan X431, Commercial Vehicle One-key Scan
X431, Sinotruk X431, SITCAR heavy truck X431, Sunlong Bus (SUNLONG) X431, heavy truck Jiangling X431, diesel version Toyota
X431, MAN X431, NEOPLAN Heavy Duty Truck X431, Sunwin Bus (SUNWIN) X431, Caterpillar Heavy Duty Truck X431, TRAILER Heavy Duty Truck




Package List:

 

 

1pc x Display tablet

1pc x  SmartLink HD

 

 



Shipping method and delivery time:

US, UK ,RU Warehouse: 2-4 working days. We have stocked up hot sale items in US, UK ,RU Warehouse, Fast Delivery No Tax. But if overseas warehouse is sold out,we will send from Hongkong. 
Ship From UK, No Tax
Ship From US, No Tax
Ship From EU, No Tax
DHL Shipping: 2-4 working days. Usually we declare lower value on DHL invoice. If your address is remote area for DHL, customer will need to pay remote cost about 35USD or ship by EMS or YANWEN. Please leave message if you have any special requirement.
Yanwen Express: 5-10 working days. No Tax or remote cost for European Countries.

Top 10 reasons to buy from carobdtool.com website

1.Our website is 12 years old, and always online.

2.We are professional with these tools and a reliable company.

3.There are professional engineers on our team.

4.We have our own manufacturer.

5.Fast delivery 

6.Many customers buy from us, just rest assured to buy in our webiste.

7.Items are very good quality.

8.We package our items safely and securely.
9.Safe purchase, and your privacy is secure. 
10.We provide one year warranty and free technical services.

Contact information: